80+ Years of Interconnect Manufacturing Experience
Amphenol SF-NDAQGJ100G-003M 3m QSFP28 to 4 x SFP28 Splitter Cable (26 AWG Passive Copper) - 1 x QSFP28 (100GbE) to 4 x SFP28 (25GbE) Connectors (9.8 ft)
Product: SF-NDAQGJ100G-003M
Amphenol’s revolutionary 3m (9.8 ft) 100-Gigabit Ethernet QSFP28 to 4 x 25-Gigabit Ethernet SFP28 Splitter Cable offers IT professionals a cost-effective interconnect solution for merging new 100GbE QSFP28 and 25GbE SFP28 enabled host adapters, switches and servers. For typical applications, users can install this splitter cable (a.k.a. “octopus” or "fan-out" cable) between an available QSFP28 port on their 100-Gigabit/s rated switch and feed up to four upstream 25GbE-SFP+ enabled switches. Each QSFP28-SFP28 splitter cable features a single QSFP28 connector (SFF-8665) rated for 100-Gbps on one end and (4) SFP28 connectors (SFF-8402), each rated for 25-Gbps, on the other. Amphenol is the only manufacturer of QSFP to 4 SFP+ Splitter Cables that designs and sources every subassembly in-house – guaranteeing complete control over product performance, quality and consistency. Examples include our use of 26 AWG Amphenol SpectraStrip SKEWCLEAR wire, attaining the industry’s lowest attenuation and skew characteristics; as well as our widely respected “board-as-connector” platform which is direct-welded to the wire and encased in a robust Zinc-Nickel backshell for superior crosstalk and EMI performance. Identical to OEM Amphenol High-Speed I/O (HSIO) cable assembly of comparable specifications (length/AWG).
- Quantity Available: 14
- Availability: In stock
- Amphenol QSFP28 100GbE to 4 x SFP28 25GbE Splitter Cable - 2m (6.6')
- Connector A: (1) QSFP28 100 Gbps Rated Connector (SFF-8665)
- Connector B: (4) SFP28 25 Gbps Rated Connectors (SFF-8402)
- Economically Link up a QSFP28 port with up to 4 Upstream SFP28 Switches
- 26 AWG Amphenol Spectra-Strip High Bandwidth SKEWCLEAR 8X Wire
- Protocol agnostic support of 100GbE, EDR InfiniBand & 128G Fibre Channel
- Up to 28.05 Gbps transfer rate per SFP28 channel (100+ Gbps aggregate)
- Robust Zinc die-cast SFP28 & QSFP28 connectors with pull-to-release latching
- Bridge the gap between your 100G and 25G capable switches/host adapters
- SKEWCLEAR cable provides 17% less attenuation than our competitors
- Low cross-talk and pair-to-pair skew maintains signal integrity
- Fully compliant to the latest SFP28 & QSFP28 MSA (Multi-Source-Agreement)
- Supports all current 100-Gigabit Ethernet and 25-Gigabit Ethernet standards
- Designated form factor and electrical compliance for EDR InfiniBand
- The perfect direct attached storage splitter cable for 128G Fibre Channel
- Enjoy a reduced power budget and lower port cost compared to optical
- Fully RoHS compliant for environmental protection
- Notice: The cable pull-tab lanyard color Fall vary from what is pictured (blue or green)
- Identical to OEM Amphenol High-Speed I/O (HSIO) cable assembly of comparable specifications (length/AWG).
