80+ Years of Interconnect Manufacturing Experience
Amphenol SF-NDAQGF100G-001.5M 1.5m QSFP28 to 4 x SFP28 Splitter Cable (30 AWG Passive Copper) - 1 x QSFP28 (100GbE) to 4 x SFP28 (25GbE) Connectors (4.9 ft)
Product: SF-NDAQGF100G-001.5M
Amphenol’s revolutionary 1.5m (4.9 ft) 100-Gigabit Ethernet QSFP28 to 4 x 25-Gigabit Ethernet SFP28 Splitter Cable offers IT professionals a cost-effective interconnect solution for merging new 100GbE QSFP28 and 25GbE SFP28 enabled host adapters, switches and servers. For typical applications, users can install this splitter cable (a.k.a. “octopus” cable) between an available QSFP28 port on their 100-Gigabit/s rated switch and feed up to four upstream 25GbE-SFP+ enabled switches. Each QSFP28-SFP28 splitter cable features a single QSFP28 connector (SFF-8665) rated for 100-Gbps on one end and (4) SFP28 connectors (SFF-8402), each rated for 25-Gbps, on the other. Amphenol is the only manufacturer of QSFP to 4 SFP+ Splitter Cables that designs and sources every subassembly in-house – guaranteeing complete control over product performance, quality and consistency. Examples include our use of 30 AWG Amphenol SpectraStrip SKEWCLEAR wire, attaining the industry’s lowest attenuation and skew characteristics; as well as our widely respected “board-as-connector” platform which is direct-welded to the wire and encased in a robust Zinc-Nickel backshell for superior crosstalk and EMI performance. Identical to OEM Amphenol High-Speed I/O (HSIO) cable assembly of comparable specifications (length/AWG).
- Amphenol QSFP28 100GbE to 4 x SFP28 25GbE Splitter Cable - 1.5m (4.9 ft)
- Connector A: (1) QSFP28 100 Gbps Rated Connector (SFF-8665)
- Connector B: (4) SFP28 25 Gbps Rated Connectors (SFF-8402)
- Economically Link up a QSFP28 port with up to 4 Upstream SFP28 Switches
- 30 AWG Amphenol Spectra-Strip High Bandwidth SKEWCLEAR 8X Wire
- Protocol agnostic support of 100GbE, EDR InfiniBand & 128G Fibre Channel
- Up to 28.05 Gbps transfer rate per SFP28 channel (100+ Gbps aggregate)
- Robust Zinc die-cast SFP28 & QSFP28 connectors with pull-to-release latching
- Bridge the gap between your 100G and 25G capable switches/host adapters
- SKEWCLEAR cable provides 17% less attenuation than our competitors
- Low cross-talk and pair-to-pair skew maintains signal integrity
- Fully compliant to the latest SFP28 & QSFP28 MSA (Multi-Source-Agreement)
- Supports all current 100-Gigabit Ethernet and 25-Gigabit Ethernet standards
- Designated form factor and electrical compliance for EDR InfiniBand
- The perfect direct attached storage splitter cable for 128G Fibre Channel
- Enjoy a reduced power budget and lower port cost compared to optical
- Fully RoHS compliant for environmental protection
- Notice: The cable pull-tab lanyard color Fall vary from what is pictured (blue or green)
- Identical to OEM Amphenol High-Speed I/O (HSIO) cable assembly of comparable specifications (length/AWG).
