80+ Years of Interconnect Manufacturing Experience
Amphenol SF-QSFP4SFPPS-001 1m QSFP to 4 SFP+ Splitter Cable (30 AWG Passive Copper) - 1 x QSFP+ (40GbE) to 4 x SFP+ (10GbE) Connectors (3.3 ft)
Product: SF-QSFP4SFPPS-001
UPC: 812834020327
Amphenol’s revolutionary 1m (3.3 ft) QSFP to 4 SFP+ Splitter Cable offers IT professionals a cost-effective interconnect solution for merging 40GbE QSFP+ and 10GbE SFP+ enabled host adapters, switches and servers. For typical applications, users can install this splitter cable (a.k.a. “octopus” cable) between an available QSFP/QSFP+ port on their 40-Gigabit/s rated switch and feed up to four upstream 10GbE-SFP+ enabled switches. Each QSFP-SFP+ splitter cable features a single QSFP+ connector (SFF-8436) rated for 40-Gbps on one end and (4) SFP+ connectors (SFF-8431), each rated for 10-Gbps, on the other. Amphenol is the only manufacturer of QSFP to 4 SFP+ Splitter Cables that designs and sources every subassembly in-house – guaranteeing complete control over product performance, quality and consistency. Examples include our use of 30 AWG Amphenol SpectraStrip SKEWCLEAR wire, attaining the industry’s lowest attenuation and skew characteristics; as well as our widely respected “board-as-connector” platform which is direct-welded to the wire and encased in a robust Zinc-Nickel backshell for superior crosstalk and EMI performance. Also available in 3m (6.6 ft) and 5m (16.4 ft) lengths to accommodate your installation requirements.
- Quantity Available: 3
- Availability: In stock
- Amphenol QSFP (40GbE) to 4 x SFP+ (10GbE) Splitter Cable - 1m (3.3 ft)
- Connector A: (1) QSFP+ 40 Gbps Rated Connector (SFF-8436 Compliant)
- Connector B: (4) SFP+ 10 Gbps Rated Connectors (SFF-8431 Compliant)
- Economically Links up a QSFP/QSFP+ port with an Upstream 10GbE-SFP+ Switch
- 30 AWG Amphenol Spectra-Strip High Bandwidth SKEWCLEAR 8X Wire
- Protocol agnostic support of 40GbE, QDR InfiniBand, SAS & Fibre Channel
- Up to 10.3125 Gbps transfer rate per SFP+ channel (40 Gbps aggregate)
- Robust Zinc die-cast SFP+ & QSFP+ connectors with pull-to-release latching
- Bridge the gap between your 10G and 40G capable switches/host adapters
- SKEWCLEAR cable provides 17% less attenuation than our competitors
- Low cross-talk and pair-to-pair skew maintains signal integrity
- Fully compliant to the latest SFP+ & QSFP MSA (Multi-Source-Agreement)
- Supports all current 10-Gigabit Ethernet and 40-Gigabit Ethernet standards
- Designated form factor and electrical compliance for QDR InfiniBand
- The perfect direct attached storage splitter cable for Fibre Channel & SAS
- Enjoy a reduced power budget and lower port cost compared to optical
- Fully RoHS compliant for environmental protection
- Offered in (3) popular lengths including 1m (3.3ft), 3m (9.8ft) & 5m (16.4ft)
